This external warning light has been designed for long life and harsh conditions and it is the premier external warning light in our range. Our light assembly design has been tested in a container of water for over two years. The LED modules are coated in a protective coating, zinc plated as well as powder coated for extra environmental protection and longevity to protect against moisture and vibration. The unit has a built in siren, adjustable supports for a variety of mounting options including the ability to tilt the assembly for situations when the light is mounted on a sloped surface.
Specifications
Mechanical:
Dimensions: 355 x 79 x 65 (excluding mounting bracket footprint)
Mounting centres: (Brackets Towing In) 51 X 327 (Nominal slotted holes)
(Brackets Towing Out) 51 X 375 (Nominal slotted holes)
Bracket angle adjustment: plus or minus 200
Weight: 1.63Kg
Construction: Case 1.6mm steel
Mounting Plate 1.6mm steel
Brackets 2mm steel
Surface Finish: Powder Coat over zinc plated steel
Viewing angle: Greater than 800
SPL Output: 95dB (@30cm)
Frequency 3500Hz
Light Module Protection Encapsulated (UV stable water clear polyurethane resin)
Electrical:
Polarity. Rectifier bridge inputs (polarity independent)
Termination Screw terminal (4 x Input, 1 x Common)
Supply Voltage. 10 – 30 VDC
Supply Current.
Approximate supply current for voltage.
|
Green |
Yellow |
Red |
Buzzer |
12V |
80mA |
160mA |
140mA |
6mA |
24V |
40mA |
80mA |
70mA |
12mA |
Note. Due to current inrush at power up it is recommended that the control circuit be capable of at least 500mA.
(172)
SKU | 172 |
Shipping Weight | 2.0000kg |
Shipping Width | 42.000m |
Shipping Height | 7.000m |
Shipping Length | 12.000m |
Shipping Cubic | 3528.000000000m3 |